Sungrow-SG5-to-SG12RT-P2-On-Grid-Inverter

Sungrow SG5.0RT-P2 5kW 3-Phase On-Grid Inverter

Price on request
Compare this modelDownload datasheet (PDF)

Full specifications

Brand
Inverter Specifications
ModelSG5.0RT-P2
Inverter typeOn-Grid
Grid typeThree Phase
IP classIP65
PV Input Data
Max DC input power7500 W
PV input voltage1100 V
MPPT voltage range160-1000 V
Max. PV input current16 A
No. of MPPT2
No. of strings per MPPT1
Startup voltage180 V
AC Output Data
Rated AC output5000 W
Rated AC output current8.3 A
Rated voltage400 V
Power factor> 0.99 (adjustable 0.8 leading to 0.8 lagging)
Battery Data
Battery typeNone (on-grid)
BMSWLAN / Ethernet / RS485 / DI / DO
Protections
PV arc fault detectionYes
PV reverse polarity detectionYes
Leakage current detectionYes
Output short circuit protectionYes
Surge protectionYes
General Specifications
Weight18 kg
Operating temperature-25°C ~ +60°C
Max. efficiency98.3%
Size (W×H×D)370 × 480 × 195 mm
Note: Three-phase grid-tied only - no battery input and no backup output, so it feeds the building and exports the surplus under net metering. Sungrow recommend up to 7.5 kWp of array on a 5 kW inverter. Two independent MPP trackers over a 160-1000 V window on an 1100 V ceiling, starting at 180 V. Both trackers take 16 A with a single string each (32 A total). European weighted efficiency 97.20%, peak 98.30%. Built-in Type II surge protection on both DC and AC, arc-fault interruption, PID recovery and a DC switch as standard. C5 anti-corrosion rating and IP65, naturally cooled with no fan to fail, 18 kg. Plug-and-play AC connector and MC4 on the DC side. WLAN, Ethernet and RS485 all built in. The current shown is the maximum AC output current, which is what both Sungrow sheets publish for every model in the range. Note the inverter idles in standby between 1000 V and 1100 V rather than tripping - but above 1000 V the supplied MC4 connectors must be swapped for MC4 Evo2.