Sako Sunpolo 6kW Hybrid Inverter

Note: 6000 W rated AC output from up to 6000 W of PV on a single MPPT tracker at 27 A, over a 120 to 450 V window with a 500 V ceiling, a 360 V nominal DC point and a 120 V start. Grid feed-in is documented: the sheet carries a Grid-Tie Operation block with a 184 to 265 V feed-in window and 26 A nominal output at 230 V single phase, so this model can in principle be net-metered. Its certification line is not printed on the sheet, and a DISCO application normally asks for IEC 62116 anti-islanding and IEC 61727 grid-connection certificates, so ask the distributor for those before you apply. Maximum conversion efficiency 96% in grid-tie mode and 93% from battery to AC. 48 V battery bank with 120 A of solar charging, 120 A from the mains and 120 A combined. AC input 90 to 280 V or 170 to 280 V selectable at up to 40 A, starting at 120 to 140 V and auto-restarting at 180 V. Power factor above 0.9. Parallel operation is an option rather than standard, up to 9 units. RS232, USB, RS485 and WiFi. The sheet gives no IP rating, no protection list, no warranty term and no battery type row, so those fields are left empty rather than guessed. One MPPT tracker only, so every string has to face the same way, which is the main limit on this model against hybrids of the same size with two trackers. Rated 5% to 95% humidity and -10 to 50 °C. 12 kg net, 13.5 kg packed. The case is 303 mm wide, 456 mm tall and 148 mm deep; the sheet labels that row D x W x H, which does not match a wall-mounted box of this shape. Price shown is the w11stop.com listing, Rs 207,000 (in stock), read 22 September 2026.