Full specifications

Brand	MaxPower
Inverter Specifications
Model	HYD-12K-H6
Inverter type	Hybrid
Grid type	Single Phase
IP class	IP66
Warranty	5 Years
PV Input Data
Max DC input power	18000 W
PV input voltage	600 V
MPPT voltage range	90-500 V
Max. PV input current	20 A
No. of MPPT	4
No. of strings per MPPT	1
Startup voltage	100 V
AC Output Data
Rated AC output	12000 W
Rated AC output current	52.5 A
Rated voltage	230 V
Smart load / generator input	Yes
Power factor	0.8 leading to 0.8 lagging
Battery Data
Battery type	Lithium & Lead-Acid
Battery voltage range	40-60 V
Max. charging current	200 A
Max. discharging current	200 A
BMS	WiFi / 4G / USB / CAN / RS485
Protections
PV reverse polarity detection	Yes
Insulation resistance detection	Yes
Leakage current detection	Yes
AC overcurrent protection	Yes
Output short circuit protection	Yes
Surge protection	Yes
Over voltage protection	Yes
General Specifications
Weight	39 kg
Operating temperature	-25°C ~ +60°C
Max. efficiency	98%
Size (W×H×D)	425 × 660 × 290 mm

Note: Grid feed-in is documented on the datasheet, so this model can be net-metered. Four independent MPPTs at 20 A each, one string per tracker - the most trackers of any inverter in this catalogue at this size, and the reason to pick it if the roof faces several directions. 200 A charge and discharge on a 40-60 V bank. Maximum apparent power 13.2 kVA; the utility side supplies up to 24 kVA and 120 A, so it will pass a heavy load through while charging. Backup switches in under 10 ms. Runs the grid and a diesel generator at the same time. IP66 and -25 to +60 degC, so outdoor mounting is fine. Peak efficiency 98%, European 97.5%, battery-to-load 94.4%. 7-inch touch LCD, 39 kg, 5-year warranty.