itel IPV-8K48T 8kW Hybrid Inverter
Rs 205,000 – Rs 208,000
Rs 25,625 per kW
Price updated: 22 September 2026
Full specifications
| Brand | iTel |
| Inverter Specifications | |
| Model | IPV-8K48T |
| Inverter type | Hybrid |
| Grid type | Single Phase |
| IP class | IP54 |
| Warranty | 3 Years |
| PV Input Data | |
| Max DC input power | 16000 W |
| PV input voltage | 535 V |
| MPPT voltage range | 75-500 V |
| Max. PV input current | 30 A |
| No. of MPPT | 2 |
| No. of strings per MPPT | 2 |
| Startup voltage | 85 V |
| AC Output Data | |
| Rated AC output | 8000 W |
| Rated AC output current | 50 A |
| Rated voltage | 230 V |
| Smart load / generator input | Yes |
| Parallel operation | Yes |
| Battery Data | |
| Battery voltage range | 40-60 V |
| Max. charging current | 160 A |
| Max. discharging current | 180 A |
| BMS | WiFi / RS485 / CAN / RS232 / Dry-contact |
| Protections | |
| AC overcurrent protection | Yes |
| Output short circuit protection | Yes |
| Surge protection | Yes |
| Over voltage protection | Yes |
| General Specifications | |
| Weight | 19 kg |
| Operating temperature | -10°C ~ +60°C |
| Size (W×H×D) | 410 × 600 × 145.7 mm |
Note: No grid export and no net metering - the datasheet has no grid-output or feed-in section, and certification stops at IEC62109 and IEC61683 without the IEC62116 anti-islanding and IEC61727 grid-connection standards a net-metered unit needs. It runs the load from PV and battery and takes utility or generator as a backup charging source. Retailers list this one as a hybrid, but the datasheet has no grid-output or feed-in section and the certification list omits IEC62116 and IEC61727 - so it will run your load and charge from the grid, but it cannot export or be net-metered. 16,000 W of array on an 8 kW inverter across two MPPTs, and the trackers are not interchangeable: 30 A on one and 20 A on the other, with two strings on the first and one on the second, over a 75-500 V window on a 535 V ceiling. 48 V bank at 160 A solar and 140 A mains charging with a 180 A discharge - the highest battery currents of any itel here. Output 8000 W and 8000 VA with 16,000 VA surge for 5 s, and staged overload from 102% for a minute down to 150% for 5 s. Transfer under 10 ms in UPS mode. Supports a diesel generator and a smart load, and parallels to 12 units in either single or three phase. IP54, fan-cooled at under 50 dB, 19 kg, three-year replacement. The datasheet publishes MPPT tracking efficiency and battery-mode conversion efficiency but no PV-to-AC conversion figure, so the efficiency field is left empty rather than filled with a number that measures something else.

