itel off-grid Inverters

itel IPV-3K24U 3kW Off-Grid Inverter

Price on request
Compare this modelDownload datasheet (PDF)

Full specifications

Brand
Inverter Specifications
ModelIPV-3K24U
Inverter typeOff-Grid
Grid typeSingle Phase
IP classIP54
PV Input Data
Max DC input power1500 W
PV input voltage145 V
MPPT voltage range30-120 V
Max. PV input current25 A
No. of MPPT1
Startup voltage36 V
AC Output Data
Rated AC output3000 W
Rated voltage230 V
Battery Data
Battery voltage range20-30 V
Max. charging current60 A
Max. discharging current125 A
BMSRS485 / RS232
Protections
AC overcurrent protectionYes
Output short circuit protectionYes
Surge protectionYes
Over voltage protectionYes
General Specifications
Weight6 kg
Operating temperature-10°C ~ +55°C
Size (W×H×D)350 × 290 × 108 mm
Note: No grid export and no net metering - the datasheet has no grid-output or feed-in section, and certification stops at IEC62109 and IEC61683 without the IEC62116 anti-islanding and IEC61727 grid-connection standards a net-metered unit needs. It runs the load from PV and battery and takes utility or generator as a backup charging source. 3000 W rated, 3600 VA maximum apparent, 6000 W surge for 2 s. 1500 W of array on a single tracker at 25 A over a 30-120 V window with a 145 V ceiling - a low ceiling, so strings stay short. 24 V bank (20-30 V) at 60 A solar and 120 A mains charging, 125 A discharge. Overload capability is staged at 105-150% for 10 s and 150-200% for 2 s. RS485 and RS232. No generator support, no smart load, no parallel. IP54, 6 kg. The datasheet publishes MPPT tracking efficiency and battery-mode conversion efficiency but no PV-to-AC conversion figure, so the efficiency field is left empty rather than filled with a number that measures something else. If you want meaningful solar on a 3 kW itel, the IPV-3K24U Pro takes 4500 W of array against this model's 1500 W.