itel off-grid Inverters

itel IPV-1K512U 1.5kW Off-Grid Inverter

Price on request
Compare this modelDownload datasheet (PDF)

Full specifications

Brand
Inverter Specifications
ModelIPV-1K512U
Inverter typeOff-Grid
Grid typeSingle Phase
IP classIP54
PV Input Data
Max DC input power650 W
PV input voltage130 V
MPPT voltage range15-120 V
Max. PV input current20 A
No. of MPPT1
Startup voltage21 V
AC Output Data
Rated AC output1500 W
Rated voltage230 V
Battery Data
Battery voltage range10-15 V
Max. charging current45 A
Max. discharging current125 A
BMSRS232
Protections
AC overcurrent protectionYes
Output short circuit protectionYes
Surge protectionYes
Over voltage protectionYes
General Specifications
Weight5.5 kg
Operating temperature-10°C ~ +55°C
Size (W×H×D)350 × 290 × 108 mm
Note: No grid export and no net metering - the datasheet has no grid-output or feed-in section, and certification stops at IEC62109 and IEC61683 without the IEC62116 anti-islanding and IEC61727 grid-connection standards a net-metered unit needs. It runs the load from PV and battery and takes utility or generator as a backup charging source. 1500 W rated, 1800 VA maximum apparent, 3000 W surge for 2 s. 650 W of array on a single tracker at 20 A over a 15-120 V window. Still a 12 V bank, but note the solar charge current is *lower* than the 1 kW model at 45 A against 50 A, while mains charging is far higher at 105 A against 60 A - so this one is built to lean on the grid rather than the array. Discharges at 125 A. Accepts a wide 90-280 V grid input at up to 10 A in bypass. Adds an RS232 port. No generator support, no smart load, no parallel. IP54, 5.5 kg. The datasheet publishes MPPT tracking efficiency and battery-mode conversion efficiency but no PV-to-AC conversion figure, so the efficiency field is left empty rather than filled with a number that measures something else. Shares a datasheet with the IPV-1K12U, IPV-3K24U and IPV-3K24U Pro.