Full specifications

Brand	iTel
Inverter Specifications
Model	IHY-6KL1A
Inverter type	Hybrid
Grid type	Single Phase
IP class	IP66
Warranty	5 Years
PV Input Data
Max DC input power	12000 W
PV input voltage	500 V
MPPT voltage range	150-450 V
Max. PV input current	18 A
No. of MPPT	2
Startup voltage	125 V
AC Output Data
Rated AC output	6000 W
Rated AC output current	27 A
Rated voltage	230 V
Smart load / generator input	Yes
Parallel operation	Yes
Power factor	0.8 leading to 0.8 lagging
Battery Data
Battery voltage range	40-60 V
Max. charging current	120 A
Max. discharging current	120 A
BMS	WiFi / RS485 / CAN / Dry-contact
Protections
PV reverse polarity detection	Yes
Insulation resistance detection	Yes
Leakage current detection	Yes
AC overcurrent protection	Yes
Output short circuit protection	Yes
Surge protection	Yes
Over voltage protection	Yes
General Specifications
Weight	20 kg
Operating temperature	-25°C ~ +60°C
Max. efficiency	97.6%
Size (W×H×D)	427 × 554 × 198 mm

Note: Grid export is documented on the datasheet, so this model can be net-metered. The only itel here that can be net-metered: it has a dedicated AC Input/Output (On-Grid) section and carries IEC62116 anti-islanding and IEC61727 grid-connection certification. 12,000 W of array on a 6 kW inverter - double oversizing - across two MPPTs at 18 A each over a 150-450 V window on a 500 V ceiling. Grid output 6000 W and 6000 VA at 27 A across a 180-280 V, 45-65 Hz window with power factor adjustable from 0.8 leading to 0.8 lagging. Backup output matches at 6000 W with a 12,000 VA peak for 15 s and 200% overload for 15 s, switching in 10 ms. 48 V bank at 120 A charge and discharge from solar, mains or generator alike. 97.6% peak PV conversion, 97.0% European weighted. IP66 and rated -25 to +60 degC - the only sealed, naturally convected unit in the itel range, silent at under 40 dB. Parallels to 12 units. 20 kg, five-year replacement.