Growatt SPE 10000 ES 10kW Hybrid Inverter
Price on request
Full specifications
| Brand | Growatt |
| Inverter Specifications | |
| Model | SPE 10000 ES |
| Inverter type | Hybrid |
| Grid type | Single Phase |
| IP class | IP20 |
| PV Input Data | |
| Max DC input power | 12500 W |
| PV input voltage | 550 V |
| MPPT voltage range | 60-480 V |
| Max. PV input current | 27 A |
| No. of MPPT | 2 |
| No. of strings per MPPT | 1 |
| Startup voltage | 120 V |
| AC Output Data | |
| Rated AC output | 10000 W |
| Rated AC output current | 43.5 A |
| Rated voltage | 230 V |
| Parallel operation | Yes |
| Power factor | 0.8 leading to 0.8 lagging |
| Battery Data | |
| Battery type | Lithium & Lead-Acid |
| Battery voltage range | 48 V |
| Max. charging current | 220 A |
| Max. discharging current | 240 A |
| Protections | |
| PV arc fault detection | Yes |
| PV reverse polarity detection | Yes |
| Insulation resistance detection | Yes |
| Leakage current detection | Yes |
| AC overcurrent protection | Yes |
| Output short circuit protection | Yes |
| Surge protection | Yes |
| General Specifications | |
| Weight | 21.5 kg |
| Operating temperature | -10°C ~ +50°C |
| Max. efficiency | 96.5% |
| Size (W×H×D) | 550 × 465 × 150 mm |
Note: Standard 48 V battery bank, so it works with the lead-acid and lithium banks already common in Pakistan - unlike the high-voltage hybrids from Fox and some Growatt lines. 220 A charge and 240 A discharge is a lot of current for the money. Two caveats. First, IP20 and rated only -10 to +50 degC: this is an indoor unit and must not go on an outside wall. Second, peak efficiency is 96.5% and European 95.5%, noticeably below the 98% grid-tie models, and it draws under 75 W just idling. Backup switchover is under 20 ms single, under 30 ms in parallel. Fan cooled and audible at up to 75 dB.