X1 genki 6kw Fronus Inverters

Fronus X1-GENKi 6kW Single-Phase Off-Grid Inverter

Full specifications

Brand
Inverter Specifications
ModelX1-GENKi-6kW
Inverter typeOff-Grid
Grid typeSingle Phase
IP classIP65
Warranty5 Years
PV Input Data
Max DC input power12000 W
PV input voltage550 V
MPPT voltage range80-520 V
Max. PV input current16 A
No. of MPPT2
No. of strings per MPPT2
Startup voltage110 V
AC Output Data
Rated AC output6000 W
Rated AC output current26.1 A
Rated voltage230 V
Battery Data
Battery typeLithium & Lead-Acid
Battery voltage range40-60 V
Max. charging current120 A
Max. discharging current120 A
BMSCAN / RS485 / CT / Meter / USB / NTC / WiFi+LAN
Protections
PV reverse polarity detectionYes
Insulation resistance detectionYes
Leakage current detectionYes
AC overcurrent protectionYes
Output short circuit protectionYes
Surge protectionYes
Over voltage protectionYes
General Specifications
Weight17.3 kg
Operating temperature-25°C ~ +60°C
Max. efficiency97.6%
Size (W×H×D)397 × 490 × 201 mm
Note: No grid export and no net metering. Verified on the Fronus product page: this model has no Grid-Tie Operation block and no feed-in voltage or frequency range, so it cannot synchronise to WAPDA or K-Electric. It will still take utility or generator in as a backup source and charge the battery from it - that is not the same as being grid-interactive. Runs as an off-grid system: this unit runs the load from PV and battery and accepts grid or generator as a backup source, but it does not export to the grid, so it cannot be net-metered. Standard 48 V bank (40-60 V), lithium or lead-acid, 120 A charge and discharge - it works with the batteries already common in Pakistan. PV array ceiling is 12,000 Wp but maximum PV input power is 9,000 W, so the array can be substantially oversized against the tracker. EPS output 6000 VA with 12,000 VA peak for 10 s and switchover under 4 ms - the fastest transfer of any Fronus unit here. 17.3 kg, IP65, smart cooling, under 45 dB. 5-year warranty.