Full specifications

Brand	Fronus
Inverter Specifications
Model	PV9200 (Platinum)
Inverter type	Hybrid
Grid type	Single Phase
IP class	IP21
PV Input Data
Max DC input power	9200 W
PV input voltage	500 V
MPPT voltage range	90-450 V
Max. PV input current	23 A
No. of MPPT	1
Startup voltage	90 V
AC Output Data
Rated AC output	8200 W
Rated AC output current	35.6 A
Rated voltage	230 V
Power factor	> 0.99
Battery Data
Battery type	Lithium & Lead-Acid
Battery voltage range	48 V
Max. charging current	160 A
Max. discharging current	200 A
BMS	RS232 / WiFi / Remote LCD / GPRS
Protections
PV reverse polarity detection	Yes
Insulation resistance detection	Yes
Leakage current detection	Yes
AC overcurrent protection	Yes
Output short circuit protection	Yes
Surge protection	Yes
Over voltage protection	Yes
General Specifications
Weight	14.2 kg
Operating temperature	-10°C ~ +50°C
Max. efficiency	98%
Size (W×H×D)	310 × 110 × 420 mm

Note: Hybrid with grid feed-in over a 195-253 VAC window, so it can be net-metered. 48 V bank, and the charging is the story: 160 A from solar, 140 A from utility, 200 A total - far above the Infineon Reborn PV9200's 100 A utility figure. One MPP tracker at 23 A over a 90-450 V window on a 500 V ceiling; the Reborn twin uses two trackers, so string design is not interchangeable between them. Dual load output: main 8,200 W, second circuit up to 2,733 W in battery mode, cutting out at 44 VDC and returning at 52 VDC. Maximum AC input 40 A, surge 16,400 W. 98% conversion efficiency, 94% battery-to-AC. 14.2 kg in a 310 x 110 x 420 case, noticeably smaller than the Reborn's. IP21 and -10 to +50 degC - indoor only.