NARADA-4.8KWH-IP20-48NPFC100-lithium battery-48v-100Ah

Narada 4.8kWh Lithium-ion Battery 48V (48NPFC100)

Full specifications

Brand
Model48NPFC100
Electrical Specifications
Battery typeLithium
Battery chemistryLiFePO4
Capacity100 Ah
Nominal energy4.8 kWh
Nominal voltage48 V
Operating voltage range40.5-54.0 V
Max. parallel batteries8
Continuous charging current100 A
Continuous discharging current100 A
General Specifications
Temperature rangeCharge 0°C ~ +60°C / Discharge -20°C ~ +60°C
IP classIP20
Communication portRS232 / RS485 (2 ports)
Dimensions (W×H×D)442.5 × 133 × 400 mm
Weight38.5 kg
Mounting typeRack
Note: A 15-cell, 48 V nominal pack rather than the 16-cell 51.2 V design used by the Narada NESR and most batteries on Solar Guide. Charge voltage is 54.0 V (±0.5 V) and discharge ends at 40.5 V, so set the inverter for a 48 V LiFePO4 pack and do not mix it with 51.2 V modules in one bank. Communication is RS232 and RS485 only, with no CAN port. Confirm your inverter supports this battery's RS485 protocol before ordering, because an inverter that reads a lithium BMS only over CAN will not see it. Narada publish no cycle life, no depth of discharge and no usable energy figure on this datasheet, so usable capacity is not shown here. Rated capacity is 100 Ah at 0.2C down to 40.5 V at 25°C. Recommended charge current is 20 A (0.2C) against a 100 A maximum both ways. A front-panel breaker is fitted, while the LCD screen is optional rather than standard. Parallels to 8 modules, half the NESR's 16. 3U rack format, 133 mm high, 38.5 kg, IP20 so indoors and dry. Charges from 0°C to +60°C and discharges from -20°C to +60°C, with 15°C to 35°C recommended. No settled Pakistani retail price found yet.