MaxPower 1.28kWh Lithium-ion Battery 12.8V (MP 1200-Pro)
Price on request
Full specifications
| Brand | MaxPower |
| Model | MP 1200-Pro |
| Electrical Specifications | |
| Battery type | Lithium |
| Battery chemistry | LiFePO4 |
| Capacity | 100 Ah |
| Nominal energy | 1.28 kWh |
| Nominal voltage | 12.8 V |
| Operating voltage range | 10.8-14.6 V |
| Continuous charging current | 50 A |
| Continuous discharging current | 100 A |
| General Specifications | |
| Temperature range | Charge 0°C ~ +55°C / Discharge -30°C ~ +60°C |
| IP class | IP20 |
| Dimensions (W×H×D) | 330 × 215 × 172 mm |
| Weight | 10 kg |
| Mounting type | Floor |
Note: The entry model in the Pro range and a straight replacement for a 12 V lead-acid battery. Bulk charge 14.6 V, float 13.8 V, cut-off 10.8 V. Standard working current 50 A with 100 A maximum - size continuous loads against the 50 A figure. 10 kg. Note this is the only MaxPower battery here with no communication port and no parallel rating published - the datasheet omits both, where every other model lists CAN and RS485. MaxPower publish no cycle life on this datasheet - the sheet has no cycle-count row at all. Only the two Ultra models in their range quote one, and they do it to a 60% end-of-life threshold rather than the 70-80% used by most brands here, so even those are not directly comparable. No depth of discharge is stated either, so no usable-energy figure is derived. Ask the dealer for a warranty document before sizing a system on lifetime cost. MaxPower publish a compatibility list covering Solis, Growatt, Sofar, SAJ, ATESS, Must, GoodWe, SMA, Deye, Megarevo, SRNE, Victron, LuxPower and Voltronic.